Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Uživatelská příručka stáhnout pdf (Strana 10)

commands in sequence using just one button.

You can store up to six macro commands in your RC050.

5.1 Program a Macro

To program a Macro, please follow the steps below:

1. Press and hold down the Macro key for 3 secs. The LED

turns ON when the key is pressed but turns OFF after 3

secs indicating that the key can be released.

2. Release the Macro key, the LED turns back ON

3. Press and release the Macro Digit key (numeric keys 1-6)

under which you want to store the Macro command. The

LED flashes once and then remains on.

4. Press and release the desired device key to begin

programming the Macro steps, LED flashes once and

remains on. An AUX key can be included in a macro

sequence, using its current programmed code.

5. Now press and release the buttons you would like to

activate in sequence starting with a device key. The LED

flashes each time a key pressed. If the sequence does not

start with a device key, the LED will flash rapidly 4 times

then remain on.

6. If you program all 16 keys including the device key into a

macro, the macro is automatically saved after the

16th key-press.

7. Once Macro programming is finished, press and release the

MACRO key to save and exit the mode. The LED will flash

slowly 4 times then turn off.

Note

• If no keys are pressed for more than 15 secs or if the macro

digit key that has previously been programmed is pressed,

the LED fast flashes 4 times and turns off.

The programming mode is existed without change.

• If a key is pressed that contains a learned function, the

learned key function is assigned to the macro sequence.

• Exit key can not be programmed into macro sequence.

5.2 Performing a Macro

If you want to execute a macro that has been previously

programmed, please follow the steps below:

1. Press and release the Macro key, The LED turns on when

the key is pressed and turns off when it is released.

2. Press and release the Macro Digit key (numeric keys 1-6)

that corresponds to the Macro command sequence you

want to execute. LED will flash once then remain on.

3. After the last command of the macro sequence has been

sent, the LED turns off. The macro is executed.

Note:

• If no keys are pressed for more than 15 secs, or if a macro

digit key is pressed and no macro is stored under it, the LED

will flash fast 4 times and turn off.

5.3 Deleting a Macro

If you want to delete a macro that has been previously

programmed, please follow the steps below:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Komentáře k této Příručce

Žádné komentáře

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Uživatelská příručka Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE