Radio Shack Easy Remote Specifikace stáhnout pdf (Strana 12)

After you set up your 6-in-1 Remote Control using the manual code search,

you can find which 3-digit code the 6-in-1 Remote Control is set to by

following these steps.

1. Press the device key you want to get the manufacturer's code from.

2. Press and hold SET UP until the red indicator light blinks twice, then

release it.

3. Press 9 - 9 - 0. The red indicator light blinks twice.

4. Press 1, and count the number of times the red indicator light blinks.

This is the first number of your 3-digit manufacturer's code.

Note:

If the red indicator light does not blink, the digit is a zero.

5. Press the 2 and count the number of times the red indicator light

blinks. This is the second number of your 3-digit manufacturer's code.

Note:

The red indictor light does not blink if the second digit of your 3-digit

manufacturer's code is a zero.

6. Press 3 and count the number of times the red indicator light blinks.

This is the third digit of your 3-digit manufacturer's code.

Note:

The red indicator does not blink if the third digit of your 4-digit

manufacturer's code is a zero.

TROUBLESHOOTING:

If the 6-in-1 Remote Control stops working after you have successfully

tested the control for each device, or if you are unable to get the

remote control to work at all, check the following:

• Confirm that your remote control devices are working properly by using

the original remote control or the manual controls.

• Be sure you press the device key for the device you want to control

before you press any other key.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Žádné komentáře

Radio Shack Easy Remote Specifikace Strana 12